extension S 15 side inlet DN 40

seals between grating and floor drain body For use with S 15 sealing kit or DallBit floor drain bodies S 15

used with polypropylene floor drain bodies 54/55, 57/58, 61 and 61/1 with: -polymer concrete collar with steel mesh reinforcement - height adjustable levelling legs - ABS raising piece - laterally adjustable upper collar - glassfibre mat reinforcement - seal * - spacer - temporary blanking plate

Gratings for CeraDrain S 15/ TistoDrain S 15 with lateral adjustment: ± 13 mm (type VR 15 and V, S 15/Ø 155: ± 5 mm) height adjustable: 40 mm * Please note: in cases where a secondary membrane is used and a DallBit drain was installed, then an S 15 seal (Art. Nr. 590022, see page 203) must be used instead of the CeraDrain seal.

used with polypropylene floor drain bodies 54/55, 57/58, 61 and 61/1 with: - ABS flange with fleece surface - ABS spigot - laterally adjustable upper collar - Tisto membrane - seal * - spacer - temporary blanking plate

Gratings for CeraDrain S 15/ TistoDrain S 15 with lateral adjustment: ± 13 mm (type VR 15 and V, S 15/Ø 155: ± 5 mm) height adjustable: 40 mm * Please note: in cases where a secondary membrane is used and a DallBit drain was installed, then an S 15 seal (Art. Nr. 590022, see page 203) must be used instead of the CeraDrain seal.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 50/DN 70 horizontal double ball-joint, adjustable 0-55° with: - DN 50 side inlet, swivelling 180° - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 50/DN 70 horizontal double ball-joint, adjustable 0-55° with: - DN 50 side inlet, swivelling 180° - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet - swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet, swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - side inlet, swivelling 180° - height adjustable grating E 15, 100 x 100 mm, 304 stainless steel grate, class K 3 (300 kg) - trap with rodding eye - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253 outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - side inlet, swivelling 180º - height adjustable grating KE 15, 150 x 150 mm, 304 stainless steel grate, class K 3 (300 kg) - trap with rodding eye - temporary blanking plate material: polypropylen

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253 outlet: DN 50/DN 70 vertical, for connection to plastic pipework with: - height adjustable grating E 15, 100 x 100 mm, 304 stainless steel grate, class K 3 (300 kg) - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor, page 258.

conforming to DIN EN 1253 outlet: DN 50/DN 70 vertical, for connection to plastic pipework with: - height adjustable grating KE 15, 150 x 150 mm, 304 stainless steel grate, class K 3 (300 kg) - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: DN 50/DN 70 vertical, for connection to plastic pipework with: - height adjustable grating KE 15, 150 x 150 mm, 304 stainless steel grate, class K 3 (300 kg) - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor, page 258.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: polypropylene spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: 304 stainless steel with threaded inserts spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: polypropylene with threaded inserts spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: polypropylene with threaded inserts spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) with flange for securing flexible flooring frame: PVC-U with threaded inserts spigot: PVC-U

Seal must be used, see pages 203/204. Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 frame: 304 or 316Ti stainless steel, with threaded inserts spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: 304 stainless steel with threaded inserts spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: 304 or 316Ti stainless steel spigot: polypropylene

Suitable grates see pages 155/221 on.

used with: floor drain types 54/55, 57/58, 61 and 61/1 cast iron drain bodies DN 70 and DN 100 (types 273/1 and 664) frame: 304 stainless steel with threaded inserts, ± 15 mm lateral adjustment spigot: polypropylene

Suitable grates see pages 155/221 on.

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm grate: 304 stainless steel, 90 x 90 mm, secured hinged cover: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 100 x 100 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 100 x 100 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 100 x 100 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 100 x 100 mm grate: 5 mm 316Ti stainless steel, secured class L 15

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 100 x 100 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 200 x 200 mm grate: 5 mm 316Ti stainless steel, secured, class L 15

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 150 x 150 mm grate: polyamid, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 150 x 150 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: polypropylene, 150 x 150 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 with flange for securing flexible flooring spigot: PVC-U frame: PVC-U, 150 x 150 mm

Seal must be used, see pages 203/204

used with floor drain types 54/55, 57/58, 61 and 61/1 with flange for securing flexible flooring spigot: PVC-U frame: PVC-U, 150 x 150 mm

Seal must be used, see pages 203/204

used with floor drain types 54/55, 57/58, 61 and 61/1 with flange for securing flexible flooring spigot: PVC-U frame: PVC-U, 150 x 150 mm

Seal must be used, see pages 203/204

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm, ± 15 mm lateral adjustment grate: 5 mm 316Ti stainless steel, class L 15

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm

Type RHS 140 grate non-slip Class C on request.

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm, ± 15 mm lateral adjustment

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm, ± 15 mm lateral adjustment

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, Ø 155 mm grate: 304 stainless steel, class K 3 (300 kg)

used with floor drain types 54/55, 57/58, 61 and 61/1 spigot: polypropylene frame: 304 stainless steel, 150 x 150 mm, ± 15 mm lateral adjustment

used with floor drain types 54/55, 57/58, 61 and 61/1. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit