grating EN 15

for all gratings S 15 155 mm long, cut to suit on site with: - push fit seal material: polypropylene

for all gratings S 15 155 mm long, cut to suit on site with: - push fit seal material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 50/DN 70 horizontal double ball-joint, adjustable 0-55° with: - DN 50 side inlet, swivelling 180° - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 50/DN 70 horizontal double ball-joint, adjustable 0-55° with: - DN 50 side inlet, swivelling 180° - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet - swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet, swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

used with floor drain types 54/55, 57/58, 61 and 61/1. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

for secured grates, 304 stainless steel, matching key available